DIMMING WINDOW FILM CAR, 6%, 76+152CM+51X300CM
Ref: ACC SCH70061 - EAN: 4002341700614
Out of stock
Delivery period:
7 days
Product added
Dimming window film car, 6%, 76+152cm+51x300cm is added to your shopping cart .
Reflection period 14 days
Free shipping from € 50.00 (BE)
Thanks
Thanks for your interest in Dimming window film car, 6%, 76+152cm+51x300cm.
We'll contact you soon.
Enhance the look of your car with this tinting film. Car window tinting has never been easier thanks to this set. Darken your car windows to the desired shade. Solar film not only keeps the heat out but also provides protection from unwanted eyes. Protect your belongings and increase your privacy in an easy way. Included with the self-adhesive film is a knife and a spatula so you can get started right away.
Features:
- Sun protection film / blackout film
- Scratch resistant
- Self-adhesive
- Easy to apply
- Black
- 6% light transmittance
- 1 roll of: 76 x 152 cm
- 1 roll of: 51 x 300 cm
- Including spatula and knife
How to start:
1. Clean and grease the window, use: Glass cleaner, glass cleaner or Vitro-car cleaner (META 70-50)
2. Cut or trim the window film to size. Tip: Make sure the film is 3 to 5 cm larger than the window.
3. Moisten the window with (soapy) water
.
4. Remove the transparent layer from the film
5. Place the film with the adhesive layer on the wetted surface and slide the film in the right place
.
6. Press the foil and use the spatula to fix the foil
7. Dry the foil
8. Cut off the excess foil with the knife
9. Using the spatula, rub all air bubbles and water out of the foil (from inside to outside)
10. Done!
Features:
- Sun protection film / blackout film
- Scratch resistant
- Self-adhesive
- Easy to apply
- Black
- 6% light transmittance
- 1 roll of: 76 x 152 cm
- 1 roll of: 51 x 300 cm
- Including spatula and knife
How to start:
1. Clean and grease the window, use: Glass cleaner, glass cleaner or Vitro-car cleaner (META 70-50)
2. Cut or trim the window film to size. Tip: Make sure the film is 3 to 5 cm larger than the window.
3. Moisten the window with (soapy) water
.
4. Remove the transparent layer from the film
5. Place the film with the adhesive layer on the wetted surface and slide the film in the right place
.
6. Press the foil and use the spatula to fix the foil
7. Dry the foil
8. Cut off the excess foil with the knife
9. Using the spatula, rub all air bubbles and water out of the foil (from inside to outside)
10. Done!