CETEOR SOS STARTING BOOSTER 12/24V - 1600/800CA

Ceteor's SOS jump starter is the solution for your fleet if you have several cars, vans and about 3 trucks. Because with this portable booster, you can start 12V vehicles up to 350 HP and trucks up to 500 HP! In the booster you will find a powerful AGM battery with pure lead that immediately provides a very high amperage for starting a battery. With this booster, you can try to start the battery for up to 10 seconds! Thanks to the built-in fuse, the battery is protected against excessive current output and short circuits.



All terminals are bent, insulated and equipped with copper that distributes the current to the two bronze terminals. The blue clamp is equipped with an LED that allows you to easily find the negative batteryborn in the dark. The Ceteor booster is equipped with a 12V cigarette socket, an illuminated voltmeter and 35mm² cables. The jumper cables have a length of 1.35m which are double insulated and can withstand frequent use. The strength of SOS booster is the result of a careful selection of the best components from around the world. They have been chosen for their quality, durability and ability to withstand extreme usage environments. You can rely on this powerful booster in any situation.



Features:

- Micro booster

- With pure lead AGM battery

- Start all 12V gasoline engines

- Start all 12V diesel engines up to 350 HP

- Start 24V diesel engines up to 500 HP

- Voltage: 12V and 24V

- Starting Ampere: 1600/800CA

- Peak Amp: 4740/2370

- Curved starting clamps

- Starting cable length: 1.35 m

- Cable thickness: 35mm²

- Fuse rating: 16A and 300A

- Automatic charger: 4A

- Weight: 20.5 kg

- Dimensions: 530 x 160 x 480 mm

- With charger included



Advantages:

- The booster can provide a powerful power boost for 10 seconds

- Starts any vehicle (even deeply discharged batteries)



Disadvantage:

- The booster must be constantly in the charger when not in use.

- Weight



Instructions for use:

1. Connect the red clamp to the positive battery terminal (+)

2. Connect the blue terminal to the negative battery terminal (-)

3. Start the engine

4. After starting, disconnect first the blue clamp and then the red

5. After use, recharge the booster with the charger supplied



Tip: We recommend to keep the booster always on the charger so that the booster is always fully charged.