ZVIZZER TRAPEZ PAD, FINE, YELLOW Ø55/20/35MM (5PCS)

ZviZZer Trapez Pad Fine is a yellow polishing pad with soft abrasive power. In combination with the ZviZZer polishing agent Fine Cut, you achieve extremely good results to give the car paint the final "finish" with an incredibly deep gloss. Ideal to remove holograms and very fine scratches to give the car paint a showroom finish. This is the perfect opportunity to apply a wax or coating now to keep the paint protected.


These small trapezoidal polishing pads have been specially developed for Nano polishers and polishers with a small backing plate (eccentric polishers). The polishing pads have a thickness of 20mm so you have more control and better power consideration while correcting the surface. Ideal for polishing rims, side mirrors and spoilers.



The polishing pads from ZviZZer feature quality foam, open cell structure and specific adhesive between velcro and foam making the polishing pads last significantly longer than polishing pads from other brands. In addition, the trapezoidal polishing pads are beveled along the entire length to prevent damage during lateral use.



Features:

- Trapezoidal polishing pad

- Abrasiveness: fine

- Color: yellow

- Foam size working surface: 55mm

- Velcro size: 35mm

- Thickness: 20mm

- Suitable for Backing Plate: 35mm

- Type of machine: excentric (DA)

- Number of pieces in packaging: 5



ZviZZer polishing pad features:

- Better power transfer

- Better control

- Better resistance to temperature rise (less deformation)

- Beveled edges



ZviZZer is first and foremost a system completely designed to simplify your work and avoid mistakes thanks to a common color code (red/orange/yellow/green) for pads, microfibers and polishes.



Sizes available for the TRAPEZ polishing pads ZviZZer series:

Sizes are expressed as follows (foam size work surface/pad thickness/ Velcro size)



Tip: When polishing a vehicle, it is very important that you always use 2 polishing pads. You then change those polishing pads after each panel so that they do not get overheated. An overheated pad will warp and the polish present will become too hot so it will no longer work efficiently.