ZVIZZER TRAPEZ PAD, HARD, RED Ø55/20/35MM (5PCS)

ZviZZer Trapez Pad Hard is a red polishing pad with high abrasive power. Combined with the ZviZZer polish Heavy Cut, this is the ideal combo to remove difficult corrections, large defects and hard coatings. Ideal to quickly remove deep scratches or sanding scratches quickly and efficiently. The paint will already have a nice shine but it is recommended to go over it again afterwards with the ZviZZer Medium Cut or Fine Cut to create extra shine.



These small trapezoidal polishing pads are specially designed for Nano polishers and polishers with a small backing plate (eccentric polishers). The polishing pads have a thickness of 20mm so you have more control and better power consideration while correcting the surface. Ideal for polishing rims, side mirrors and spoilers.



The polishing pads from ZviZZer feature quality foam, open cell structure and specific adhesive between velcro and foam making the polishing pads last significantly longer than polishing pads from other brands. In addition, the trapezoidal polishing pads are beveled along the entire length to prevent damage during lateral use.



If the surface is in very bad condition, with dull spots, deep scratches and burnt-in bird droppings for example, it is recommended to use the ZviZZer Microfiber pad first to shorten the polishing time.



Features:

- Trapezoidal polishing pad

- Abrasiveness: coarse

- Color: red

- Foam size working surface: 55mm

- Velcro size: 35mm

- Thickness: 20mm

- Suitable for Backing Plate: 35mm

- Type of machine: excentric (DA)

- Number of pieces in package: 5



ZviZZer polishing pad features:

- Better power transfer

- Better control

- Better resistance to temperature rise (less deformation)

- Beveled edges



ZviZZer is first and foremost a system completely designed to simplify your work and avoid mistakes thanks to a common color code (red/orange/yellow/green) for pads, microfibers and polishes.



Sizes available for the TRAPEZ polishing pads ZviZZer series:

Sizes are expressed as follows (foam size work surface/pad thickness/ Velcro size)



Tip: When polishing a vehicle, it is very important that you always use 2 polishing pads. You then change those polishing pads after each panel so that they do not get overheated. An overheated pad will warp and the polish present will become too hot so it will no longer work efficiently.