CETEOR SOS STARTING BOOSTER 12V/800CA

SOS Starting Booster 800CA is a professional portable starting booster that offers the solution to start a difficult to start vehicle. With this booster, all gasoline engines and diesel engines up to 250 HP can be started. In the booster you will find a powerful AGM battery with pure lead that immediately provides a very high amperage for starting a battery.



With this booster you can try to start the battery for up to 10 seconds! The booster is equipped with a fuse which protects the battery from excessive current output and short circuit. The blue clamp is equipped with an LED so you can easily find the negative batteryborn in the dark. All clamps are bent, insulated and equipped with copper which distributes the current between the two bronze clamps. The Ceteor booster is equipped with a 12V cigarette socket, an illuminated voltmeter and cables of 25mm². The jumper cables have a length of 1.3m that are double insulated with high conductivity.



With this jump starter you can help a vehicle to start several times until the battery of the jump starter is empty. The power of SOS booster is the result of a careful selection of the best components from around the world. They have been chosen for their quality, durability and ability to withstand extreme operating environments. You can rely on this powerful booster in any situation.



Features:

- Starting booster/jump starter

- With pure lead AGM battery

- Starts all 12V gasoline engines

- Starts all 12V diesel engines up to 250 HP

- Voltage: 12V

- Starting Amp: 800

- Peak Amp: 2370

- Curved starting clamps

- Cables length: 1.3 m

- Cable thickness: 25mm²

- Fuse rating: 16A

- Automatic charger: 2A

- Weight: 9.5 kg

- Dimensions: 375 x 110 x 320 mm

- With charger included



Advantages:

- The booster can provide a powerful power boost for 10 seconds

- Starts any vehicle (even deeply discharged batteries)



Disadvantage:

- The booster must be constantly in the charger when not in use.

- Weight



Instructions for use:

1. Connect the red clamp to the positive battery terminal (+)

2. Connect the blue terminal to the negative battery terminal (-)

3. Start the engine

4. After starting, disconnect first the blue clamp and then the red

5. After use, recharge the booster with the charger supplied



Tip: We recommend to keep the booster always on the charger so that the booster is always fully charged.