LIQUID ELEMENTS T3000 V3 RANDOM ORBIT POLISHER Ø125MM, 10MM HUB

The Liquid Elements T3000 V3 eccentric polisher with 10mm eccentric stroke is ideal for individuals looking behind a quality polisher. Whether an absolute newcomer to the vehicle preparation field or a professional - cardetailer, this machine is something for every user. The polisher is equipped with a 125mm backing plate and has an output of 750 watts. Due to the constant posture with distance electronics, the freely rotating rotation of the support plate does not stop, even with slight tilts on round surfaces.



Due to the modern design of the eccentric polisher, the particularly pleasant feel, as well as the robust and smooth-running electronics, the T3000 is particularly striking. The two LEDs on the top of the polisher indicate the correct pressure range during polishing. If the green LED light is sufficient, the red LED light is on, then the pressure on the surface must be reduced. This gives you control over the correct use of the machine at all times during polishing.



Moreover, you can easily convert this T3000 polisher to a 75mm support plate. This allows you to also treat small surfaces for which the standard 125mm is too large. Thanks to the optional Z41 backing plate, you can turn this 125mm polisher into a 75mm polisher, super convenient!


The pre-assembled carbon brushes (1 pair) in the machine have an average clean life of about 350 hours, which is equivalent to an overhaul of about 50 vehicles. This requires proper handling and use of the machine during the polishing process, as the life of the carbon brushes may otherwise vary greatly. Note: Replacement carbon brushes are always supplied as standard with the machine, so 2 pairs of carbon brushes are included in the delivery.



Contents:

- Liquid Elements T3000 V3 eccentric polisher

- Backing pad: 125 mm

- Set of replacement carbon brushes

- Hexagon key

- Storage bag

- Operating instructions



Features:

- Eccentric polisher

- Impact: 10mm

- Backing pad: 125mm

- 750 Watts power

- Low vibration

- Speed constant with remote electronics

- Torque control display via green and red LED

- Optionally also usable with 75mm support plate (REF: LE Z41)



Technical properties:

- Excentric rotary

- Impact: 10mm

- Voltage: 230V~

- Frequency: 50Hz

- Power consumption: 750 watts

- Speed: 2500-5500 min-1

- Disc diameter: max 125mm

- Spindle size 5/16" -24

- Weight: 2.4kg

- Lpa (sound pressure): 84dB (A)

- Lwa (sound power level): 95dB (A)

- Cable length: 8 meter